How to change oil Nissan Juke

The Nissan Juke was created in 2010 as a compact crossover SUV. It has different generations, with the first one from 2010 to 2019, and the second one starting in 2020. The Juke has a unique appearance and is known for its sporty style and advanced features.

Do I need to urgently change the oil right now?

Frequency for changing engine oil

The general frequency for changing engine oil is around every 3,000 to 5,000 miles or every 3 to 6 months, whichever comes first. The specific frequency for the Nissan Juke’s engine oil can vary. Check the owner’s manual for the recommended interval. Factors like driving conditions, oil type, and maintenance history can affect the spacing.

Checking the engine oil level

Checking the engine oil level involves verifying the amount of oil present in the engine to ensure it is at an appropriate level. It is important to check the oil level periodically as part of regular vehicle maintenance. Here’s how you can do it:

1. Park your vehicle on a level surface and ensure the engine is turned off.
2. Open the hood of your car and locate the dipstick, which is usually marked with a bright-colored handle and labeled “Engine Oil.”
3. Remove the dipstick from its tube by pulling it out.
4. Wipe the dipstick clean using a cloth or paper towel to remove any existing oil.
5. Reinsert the dipstick fully back into its tube.
6. Pull out the dipstick again and observe the oil level on the end of the dipstick.
7. The dipstick will have markings indicating the minimum and maximum oil levels. The oil level should ideally be between these two marks.
8. If the oil level is below the minimum mark or significantly low, you may need to add oil to bring it up to the proper level. Consult your vehicle’s owner’s manual for the recommended oil type and the correct procedure for adding oil.

Checking the engine oil level periodically is important for several reasons:

1. Lubrication: Engine oil lubricates various components within the engine, preventing excessive friction and wear. Maintaining the proper oil level ensures effective lubrication and helps extend the life of engine parts.
2. Cooling: Oil helps dissipate heat generated by the engine. Insufficient oil can lead to overheating and potential damage to engine components.
3. Monitoring Oil Consumption: By checking the oil level regularly, you can monitor the rate at which your engine consumes oil. If you notice a significant decrease in oil level between checks, it may indicate an underlying issue that requires attention.
4. Early Detection of Problems: Visual inspection of the oil level can reveal signs of oil leaks or excessive oil consumption, which may indicate mechanical issues or malfunctioning components. Detecting problems early can prevent more extensive damage and costly repairs.

By incorporating regular checks of the engine oil level into your vehicle maintenance routine, you can ensure that your engine is properly lubricated and identify any potential issues promptly.

Visual assessment of engine oil condition

A visual assessment of engine oil involves examining its appearance to determine its condition. You can perform a simple visual inspection to get an idea of the oil’s health. Here’s how you can do it:

1. Park your vehicle on a level surface and ensure the engine is off.
2. Open the hood and locate the dipstick for checking the engine oil level.
3. Remove the dipstick and wipe it clean with a cloth or paper towel.
4. Reinsert the dipstick fully and then remove it again.
5. Observe the color and consistency of the oil on the dipstick.

During the visual assessment, you should look for the following indicators:

1. Color: Fresh engine oil is typically amber or light brown in color. As it ages and accumulates contaminants, it becomes darker.
2. Consistency: The oil should have a smooth and uniform texture. If it appears gritty or contains metal particles, it may indicate potential engine problems.
3. Clarity: Clean engine oil is transparent or slightly translucent. If the oil appears cloudy or murky, it may suggest the presence of contaminants or water contamination.
4. Odor: Fresh engine oil usually has a mild petroleum smell. If you detect a burnt or strong odor, it could signify issues with the engine or oil breakdown.

By conducting regular visual assessments of your engine oil, you can monitor its condition and identify any potential problems.

Preparing to change engine oil

How to choose oil depending on the season and operating conditions?

When selecting oil based on the season and operating conditions, consider the temperature range and the demands placed on the engine. Here are some general guidelines:

1. Viscosity Grade: The first number in the oil’s viscosity grade represents its performance in cold temperatures, while the second number represents its performance in hot temperatures. For example, in a 5W-30 oil, the “5W” indicates its cold-start performance, and the “30” indicates its performance at operating temperature. Lower viscosity oils (e.g., 5W-30) are suitable for colder climates, while higher viscosity oils (e.g., 10W-40) are suitable for hotter climates or heavy-load conditions.
2. Owner’s Manual Recommendations: Refer to the owner’s manual or consult the vehicle manufacturer’s guidelines for oil recommendations based on the specific Nissan Juke model and operating conditions. The manual will provide information on the recommended oil grades for different temperature ranges.
3. API Certification: Look for oil that meets the requirements of the American Petroleum Institute (API) and carries the API certification symbol (e.g., “API SN”). This ensures that the oil meets the industry standards for performance and engine protection.
4. Synthetic or Conventional Oil: Synthetic oils generally offer better performance and protection in extreme temperatures and under heavy loads. They are often recommended for newer vehicles or those subjected to demanding driving conditions. Conventional oils can be suitable for standard driving conditions and older vehicles.

Always follow the specific recommendations outlined in the owner’s manual for selecting the appropriate oil for your Nissan Juke based on the season and operating conditions you encounter.

Advantages and Disadvantages of Different Types of Oils for Nissan Juke:

Different types of oils for the Nissan Juke have their own advantages and disadvantages. Here’s a simplified overview:

1. Conventional Oil:
   • Advantages: Generally more affordable, suitable for standard driving conditions.
   • Disadvantages: May break down faster under extreme temperatures or heavy loads.
2. Synthetic Oil:
   • Advantages: Offers better performance and protection in extreme temperatures and under heavy loads, reduces engine wear.
   • Disadvantages: Typically more expensive than conventional oil.
3. Synthetic Blend Oil:
   • Advantages: Provides a balance between performance and affordability, offers some benefits of synthetic oil.
   • Disadvantages: May not offer the same level of protection as full synthetic oil.

It’s important to consider the vehicle’s requirements, driving conditions, and maintenance budget when choosing the type of oil for a Nissan Juke.

Engine Oil Selection

Generation (Year of Manufacture)	Engine	Suitable Oil Viscosity	Popular American Brand	Required Amount of Oil	Article Number
First Generation (2010 – 2016)	1.6L	5W-30	Mobil 1 ($27/5 qarts), Castrol ($29/5 quarts), Valvoline ($29/5 quarts)	4.8 qt	M1-110A, 03102, 782256
Second Generation (2017 – present)	1.6L	0W-20	Royal Purple ($38/5 quart), Mobil 1 ($29/5 quart), Castrol, Valvoline	4.8 qt	M1-110A, 03124, 881147

Which Oil Filter is Right for You?

Generation (Year of Manufacture)	Engine	Popular Brand of Oil Filters in USA	Catalog Number
First Generation (2010 – 2016)	1.6L	Mobil 1 ($15), Bosch, Fram ($5)	M1-110, 3312, PH7317
Second Generation (2017 – present)	1.6L	Mobil 1 ($15), Bosch, Fram ($5)	M1-110, 3312, PH7317

Please note, the costs provided are approximations and can vary based on region and retailer. Always verify the suitability of oil and filters by referring to your vehicle’s manual or consulting with a professional mechanic or a Nissan dealership.

Necessary Tools and Conditions

To prepare for an independent engine oil change for the Nissan Juke, you will typically need the following tools and conditions:

• New oil filter
• Correct type and amount of engine oil
• Oil filter wrench
• Drain pan to collect the old oil
• Funnel for pouring new oil
• Socket set and wrench for removing the drain plug
• Safety gloves and goggles
• Rags or paper towels for cleaning spills
• Adequate workspace with proper lighting
• Proper disposal method for used oil and filter, such as taking them to a recycling center or service station

How to Warm Up the Engine Before Changing the Oil

It is generally recommended to warm up the engine before changing the oil. Here’s a simple guide:

1. Start the engine and let it idle for a few minutes to allow the oil to warm up.
2. Warm-up time can vary depending on the ambient temperature, but typically 5-10 minutes should be sufficient.
3. Warming up the engine helps to thin the oil, making it easier to drain and ensuring more contaminants are removed with the old oil.

Step-by-step Instruction

Changing the engine oil in your Nissan Juke isn’t too complicated if you’re comfortable with basic car maintenance. It should take about 30 to 45 minutes. Here’s a step-by-step guide:

1. Gather Your Tools and Supplies: You’ll need engine oil, a new oil filter, a wrench, an oil filter wrench, a drain pan, a funnel, gloves, and safety glasses.
2. Prepare Your Car: Park your Juke on a flat surface. If needed, lift the front of your car with a jack and secure it with jack stands for easier access to the oil drain plug.
3. Drain the Old Oil: Put on your gloves and safety glasses. Place the drain pan under the oil drain plug. Use your wrench to loosen the plug and allow the oil to drain out.
4. Remove the Old Oil Filter: Locate the oil filter, use your oil filter wrench to loosen it, then remove it by hand. Be careful, as it will still have some oil in it.
5. Install the New Oil Filter: Before installing the new oil filter, apply some new oil to the gasket on the top of the filter. This helps the filter to seal better. Screw the new filter into place as tight as you can by hand.
6. Replace the Drain Plug and Fill with New Oil: Once all the old oil has drained, replace the drain plug and tighten it with your wrench. Now you can fill the engine with new oil. Your Nissan Juke requires around 4.8 quarts of oil. Use the funnel to avoid spillage.
7. Check the Oil Level: Start your car and let it run for a minute to circulate the new oil. Turn off the engine, wait a couple of minutes for the oil to settle, then check the oil level with the dipstick. Add more oil if necessary.
8. Dispose of the Old Oil Correctly: Pour the old oil from the drain pan into a sealable container, like an old oil jug. Most auto parts stores will accept used oil for recycling.

Remember, it’s important to regularly check your oil levels and change your oil filter with every oil change to keep your Nissan Juke running smoothly.

Replacing Transmission Fluid in Automatic Transmission

What is the Frequency (Interval) of Changing the Transmission Fluid in an Automatic Transmission?

For most automatic transmissions, the general guideline is to change the transmission fluid every 30,000 to 60,000 miles. The interval can change depending on factors like driving conditions and habits. Severe use, such as towing, off-road driving, or frequent stop-and-start driving can necessitate more frequent changes.

What Transmission Fluid to Choose?

Generation (Years of Production of the Model)	Engine Name	Amount of Fluid Required	Popular Brands in the US
First Generation (2010 – 2016)	1.6L	7.4 qt	Valvoline, Castrol ($27/Gallon), Mobil 1
Second Generation (2017 – present)	1.6L	7.4 qt	Valvoline, Castrol ($27/Gallon), Mobil 1

Please note, costs are approximations and can vary based on the retailer and region.

Required Tool

To replace the transmission fluid in a Nissan Juke automatic transmission, you’ll need:

• Wrenches and sockets
• A drain pan
• A funnel
• Transmission fluid
• Safety gloves and glasses
• Jack stands or a car lift to access the transmission pan

Step-by-step Instruction

1. Prepare the Vehicle: Park your vehicle on a flat surface and lift it using a jack or car lift. Ensure it’s secure before starting work.
2. Drain the Old Fluid: Locate the drain plug under the transmission pan and place a drain pan underneath it. Remove the plug using a wrench and let the fluid drain.
3. Remove the Transmission Pan: Once the fluid is drained, remove the bolts holding the transmission pan. Be careful as some fluid might still be in the pan.
4. Replace the Filter: Most automatic transmissions have a filter that should be replaced when you change the fluid. It’s typically held in place by a few screws.
5. Install the Pan: Clean the pan and gasket surfaces on the transmission. Install a new gasket on the pan, and bolt it back onto the transmission.
6. Add New Fluid: Lower the vehicle and locate the transmission fluid dipstick under the hood. Remove it and insert a funnel in its place. Pour the new fluid through the funnel, making sure not to overfill.
7. Check Fluid Level: Start the engine and let it reach operating temperature. Check the fluid level on the dipstick. It should be in the “hot” range. Add more fluid if necessary.

Always consult your vehicle’s manual and follow the manufacturer’s recommendations when changing transmission fluid.

Possible Questions After Self-Service

What Problems Can Arise After an Incorrect Self-Changing Engine Oil?

If the engine oil is not changed correctly, it can cause several problems such as:

• Leaking Oil: If the drain plug or oil filter isn’t tightened properly, oil may leak out.
• Engine Damage: If you underfill or overfill the engine with oil, it can cause damage. Underfilling can cause the engine to run without enough lubrication, while overfilling can cause excess pressure on seals and gaskets.
• Contaminated Oil: If the oil isn’t drained completely, old and dirty oil can mix with the new oil and decrease its effectiveness.
• Oil Filter Issues: If the oil filter isn’t changed or is installed incorrectly, it can reduce engine performance or cause oil leaks.

How Can I Check for Engine Oil Leaks After Changing It Myself?

After changing the oil, you can check for leaks by following these steps:

• Start your car and let it run for a few minutes.
• Then, turn off the engine and let the car sit for a few more minutes.
• Look underneath your car for any signs of oil dripping onto the ground.
• You can also check the area around the oil drain plug and oil filter for any oil residue or leaks.

How to Reset the Oil Change Counter?

To reset the oil change counter on a Nissan Juke, follow these steps:

• Turn the ignition to the “ON” position without starting the engine.
• Use the directional buttons on the steering wheel to navigate to the “Settings” menu on the dashboard display.
• Select “Maintenance” and then “Oil and Filter”.
• Select “Reset” and then confirm your selection. The counter should now be reset.

What to Do With Old Oil After Replacement?

After changing the oil, don’t throw the old oil in the trash or pour it down the drain. Instead, pour it into a sealable container and take it to a local recycling facility or auto parts store. Many of these places accept used oil for free and dispose of it in an environmentally friendly way.