How to change oil Ford Transit

The Ford Transit is a versatile and reliable commercial vehicle that has been in production since 1965. The idea behind the creation of the Transit was to design a vehicle that could replace the aging fleet of British commercial vehicles. The first-generation Transit was introduced in 1965 and featured a simple and robust design that was easy to maintain and repair. Over the years, the Transit has undergone several updates and redesigns, resulting in four generations of the popular vehicle.

The second-generation Transit was introduced in 1978 and featured a more aerodynamic design and improved fuel efficiency. The third generation was introduced in 1986 and included significant upgrades in safety and handling. The fourth and current generation was introduced in 2013 and features a modern and stylish design along with advanced safety features and technology.

One of the key advantages of the Ford Transit is its versatility. The vehicle is available in a wide range of configurations, including cargo vans, passenger vans, and chassis cabs. The Transit is also available with a choice of gasoline or diesel engines, offering customers flexibility in terms of performance and fuel efficiency.

Do I need to urgently change the oil right now?

If you notice that the oil warning light is illuminated on your dashboard, or if the oil level is low, it is essential to have your oil changed immediately. Failing to do so can result in severe engine damage.

What is the frequency (interval) for changing engine oil?

The frequency for changing the engine oil in a Ford Transit depends on several factors, including the type of engine, driving conditions, and the type of oil used. Generally, it is recommended to change the oil every 7,500 to 10,000 miles or every six months, whichever comes first. However, it is best to refer to the owner’s manual for the specific recommended interval for your particular model and engine.

research

Intresting oil change frequency study is the research conducted by Edmunds, in the United States in 2019. The study analyzed over 7 million service records and concluded that most modern cars can go over 10,000 miles (16,000 km) without an oil change.

52
Poll: how often do you change your engine oil?

Vote how often you try to change your oil

How to check the engine oil level?

To check the engine oil level in a Ford Transit, start by locating the oil dipstick, which is usually located near the front of the engine. Remove the dipstick and wipe it clean with a cloth or paper towel. Then, reinsert the dipstick and remove it again to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick. If the oil level is low, add the appropriate type of oil until the level reaches the recommended level. It is essential not to overfill the engine with oil, as this can cause damage.

Visual (express) assessment of the condition of engine oil

Visual inspection of the engine oil can provide a quick indication of its condition. The oil should be clear and amber in color, indicating that it is clean and has not been contaminated. If the oil appears dark, thick, or gritty, it may be time for an oil change. To perform a rapid test, dip a clean white piece of paper into the oil and observe the color and texture. If the oil is clean and in good condition, it will leave a uniform amber stain on the paper. However, if the oil is dirty or contaminated, it may leave streaks or dark spots on the paper.

research

Study on visual assessment of motor oil condition is a study conducted by Blackstone Laboratories. The study was carried out in the United States in 2015 and was based on the analysis of over 2 million oil samples sent to the Blackstone Laboratories. The results of the study showed that the visual assessment of motor oil condition may be insufficient to determine the condition of the oil, and that analyzing the chemical composition of the oil can provide a more accurate assessment of its condition.

Preparing to change engine oil

Before changing the engine oil in a Ford Transit, it is essential to gather the necessary tools and equipment, including a new oil filter, drain pan, and the appropriate type of oil. It is also essential to ensure that the engine is warm, as warm oil will drain more easily. It is best to change the oil when the engine is cool, but not completely cold, as hot oil can cause burns.

What type of oil should be used for a car?

The type of oil to use for a car depends on the specific make and model of the vehicle, as well as the type of engine. It is best to refer to the owner’s manual for the recommended type of oil for your particular vehicle. The most common types of engine oil include conventional, synthetic, and high mileage oil. Conventional oil is the most basic type of oil and is suitable for most everyday driving conditions. Synthetic oil is a more advanced type of oil that provides superior performance and protection, particularly in extreme temperatures or high-performance vehicles. High mileage oil is designed for vehicles with more than 75,000 miles and provides additional protection for aging engines.

How to choose oil depending on the season and operating conditions?

The viscosity, or thickness, of the oil is a critical factor to consider when choosing oil based on the season and operating conditions. In general, thinner oil is best for colder temperatures, while thicker oil is better for warmer temperatures. It is best to refer to the owner’s manual for the recommended viscosity of oil for your specific vehicle. Additionally, if you plan to tow heavy loads or operate your vehicle in extreme conditions, such as high temperatures or dusty environments, you may need to use a higher viscosity oil.

Advantages and disadvantages of different types of oils for Ford Transit

Conventional oil is the most basic type of oil and is generally the most affordable. However, it may not provide the same level of protection and performance as synthetic or high mileage oil. Synthetic oil offers superior performance and protection, particularly in extreme temperatures or high-performance vehicles, but it is typically more expensive than conventional oil. High mileage oil is designed specifically for vehicles with more than 75,000 miles and provides additional protection for aging engines, but it may not be necessary for newer vehicles.

Engine oil selection

Generation (Year)EngineSuitable ViscosityPopular American Brand (3 pcs.)Required Amount of OilArticle NumberApproximate Cost (USD)
1 (1965-1978)2.0L10W-30Valvoline, Mobil 1, Pennzoil5 quarts5W-20$25-30
2 (1978-1986)2.0L10W-30Royal Purple, Castrol, Quaker5 quarts5W-20$30-35
3 (1986-2000)2.0L5W-30Mobil 1, Royal Purple, Pennzoil5.5 quartsFL820S$40-50
4 (2000-2013)2.0L5W-20Castrol, Valvoline, Mobil 15.5 quartsFL820S$30-40
5 (2013-2020)2.0L5W-20Royal Purple, Pennzoil, Mobil 15.7 quartsFL910S$40-50
6 (2020-present)2.0L5W-20Mobil 1, Royal Purple, Valvoline6 quartsFL910S$50-60

Oil Filter Selection for Ford Transit

Below is a table with the selection of oil filters for Ford Transit of all generations:

GenerationEnginePopular Brands of Oil FiltersCatalog NumberApproximate Cost (USD)
1 (1965-1986)1.7L, 2.0L, 2.4L, 3.0LMotorcraft, Fram, BoschFL-910S, PH8A, 3323$5-10
2 (1986-2000)2.0L, 2.5L, 2.9L, 3.0L, 4.0LMotorcraft, K&N, WIXFL-820S, HP-2009, 51372$5-15
3 (2000-2013)2.0L, 2.3L, 2.4L, 2.5L, 3.0L, 4.0LMotorcraft, Purolator, AC DelcoFL-400S, L14610, PF2$5-15
4 (2013-present)3.2L, 3.5L, 3.7LMotorcraft, FRAM, K&NFL-2062, PH10575, HP-7020$10-20

Necessary Tools and Conditions

Before performing an independent engine oil change for your Ford Transit, you will need a few tools and conditions:

  1. An oil filter wrench to remove the old oil filter
  2. A socket wrench with an extension to remove the drain plug
  3. A new oil filter
  4. New engine oil of the correct type and viscosity for your vehicle (refer to the owner’s manual for details)
  5. A funnel to help pour the new oil into the engine
  6. A drain pan to catch the old oil
  7. A pair of gloves to protect your hands from hot oil
  8. A level surface to park the vehicle on
  9. Properly rated jack stands or ramps to raise the front of the vehicle, if needed.

It is important to follow all safety precautions and refer to the owner’s manual for specific instructions on how to change the engine oil for your Ford Transit.

How to warm up the engine before changing the oil?

It is important to warm up the engine before changing the oil in your Ford Transit to ensure the oil flows easily and drains out completely. To do this, start the engine and let it run for at least 5 to 10 minutes until the engine reaches its normal operating temperature. This will help to liquefy the oil and make it easier to drain.

Step-by-step instruction

Changing the engine oil in your Ford Transit is a relatively simple task that can be done by anyone with basic mechanical skills. Here is a step-by-step guide to changing the engine oil on a Ford Transit:

  1. Gather the necessary tools and equipment: You will need an oil filter wrench, a drain pan, a funnel, a new oil filter, a new oil drain plug gasket, and the appropriate type and amount of engine oil for your vehicle.
  2. Warm up the engine: Run the engine for at least 5 to 10 minutes to warm up the oil.
  3. Jack up the vehicle: Use a jack to raise the vehicle and place jack stands to secure it.
  4. Locate the oil drain plug: Locate the oil drain plug under the vehicle. Place the drain pan under the plug.
  5. Drain the oil: Use the wrench to remove the drain plug and let the old oil drain into the pan. Once the oil has stopped draining, replace the drain plug gasket and reinstall the drain plug.
  6. Remove the old oil filter: Use the oil filter wrench to remove the old oil filter.
  7. Install the new oil filter: Apply a small amount of oil to the rubber gasket on the new filter, and then screw the new filter onto the engine.
  8. Add new oil: Use the funnel to add the appropriate amount of new oil to the engine.
  9. Check the oil level: Once the new oil has been added, check the oil level using the dipstick. Add more oil if necessary.
  10. Start the engine: Start the engine and let it run for a few minutes to circulate the new oil.
  11. Check for leaks: After running the engine for a few minutes, check for any leaks around the oil drain plug and oil filter.

The whole process of changing the engine oil on a Ford Transit can take anywhere from 30 minutes to an hour, depending on your level of experience and the tools you have on hand.

Replacing transmission fluid in automatic transmission

What is the frequency (interval) of changing the transmission fluid in an automatic transmission? (heading, h3) The frequency of changing the transmission fluid in an automatic transmission of a Ford Transit can vary depending on the model year, type of transmission, and operating conditions. However, as a general guideline, it is recommended to replace the transmission fluid every 30,000 to 60,000 miles or every 3 to 5 years, whichever comes first. It is important to refer to the owner’s manual or consult with a certified mechanic for the specific recommendations for your Ford Transit.

What transmission fluid to choose?

GenerationEngineFluid AmountPopular BrandsCatalog NumberApproximate Cost
1 (1985-1991)2.5L8.8 quartsMobil 1, Castrol, ValvolineMERCON V$8-10/qt
2 (1992-2000)2.5L, 3.0L9.5 quartsMobil 1, Royal Purple, AmsoilMERCON V$8-10/qt
3 (2000-2014)2.3L, 2.4L, 2.5L, 3.0L10.3 quartsMobil 1, Royal Purple, AmsoilMERCON V$8-10/qt
4 (2014-present)3.2L, 3.5L13 quartsMobil 1, Royal Purple, AmsoilMercon LV$10-12/qt


Required tool

Here are some tools and conditions you will need to replace the transmission fluid in a Ford Transit automatic transmission:

  • A transmission fluid drain pan
  • A socket wrench set
  • A funnel
  • A new transmission filter (if necessary)
  • The appropriate type and amount of transmission fluid (refer to your owner’s manual for specifications)
  • A jack and jack stands
  • A clean rag or shop towel

Make sure you have all the necessary tools and equipment before starting the job. It’s also important to work in a well-ventilated area and wear appropriate safety gear, such as gloves and eye protection.

Step-by-step instruction

Here is a step-by-step instruction on how to change the transmission fluid in a Ford Transit automatic transmission:

  1. Warm up the transmission by driving the vehicle for about 10-15 minutes to ensure that the fluid is at operating temperature.
  2. Lift the vehicle using a jack and jack stands to create enough clearance to access the transmission pan.
  3. Place the transmission fluid drain pan underneath the transmission pan and remove the bolts that secure the pan to the transmission using a socket wrench.
  4. Allow the fluid to drain completely into the pan.
  5. Once the fluid has finished draining, remove the old transmission filter and replace it with a new one (if necessary). Make sure to clean the mounting surface of the transmission before installing the new filter.
  6. Clean the transmission pan using a clean rag or shop towel and install a new gasket or seal (if necessary).
  7. Install the transmission pan and secure it using the bolts that were removed earlier.
  8. Use a funnel to add the appropriate amount of new transmission fluid into the dipstick tube.
  9. Start the engine and allow it to run for a few minutes. Shift through all the gears to allow the fluid to circulate throughout the transmission.
  10. Check the transmission fluid level using the dipstick and add more fluid as necessary.
  11. Lower the vehicle back to the ground and check for any leaks.

The entire process should take around 1-2 hours to complete. It’s important to follow the manufacturer’s specifications for the type and amount of transmission fluid to use, as using the wrong type of fluid can cause damage to the transmission.

Possible questions after self-service

As a car owner, it’s important to know how to perform basic maintenance on your vehicle, such as changing the engine oil. However, improper self-service can lead to various problems that can affect your car’s performance. In this article, we will discuss some of the possible questions that may arise after self-service, and provide some tips on how to avoid them.

What problems can arise after an incorrect self-changing engine oil?

One of the most common problems that can occur after an incorrect self-changing engine oil is engine damage. This can happen if the wrong type of oil is used, or if the oil level is incorrect. Using the wrong type of oil can cause the engine to work harder than it should, which can lead to increased wear and tear. Similarly, an incorrect oil level can cause the engine to work harder, leading to premature wear and tear.

Another common problem that can arise is engine oil leaks. This can happen if the oil filter or drain plug is not tightened properly or if the gasket is damaged. In addition, if the oil is not changed regularly, it can break down and lose its effectiveness, leading to increased wear and tear on the engine.

How can I check for engine oil leaks after changing it myself?

To check for engine oil leaks after changing it yourself, you can start by looking under the car for any signs of oil. Check around the oil filter, drain plug, and oil pan for any signs of oil leakage. Additionally, you can check the oil level on the dipstick to see if it has dropped significantly since the oil change. If you notice any of these signs, it’s important to address the issue immediately to prevent any further damage to your engine.

How to reset the oil change counter?

Resetting the oil change counter on a Ford Transit is a simple process that can be done in just a few steps. First, turn the ignition key to the “on” position without starting the engine. Next, press and release the accelerator pedal three times within five seconds. Finally, turn the ignition key to the “off” position. When you turn the ignition key back on, the oil change counter should be reset.

What to do with old oil after replacement?

Properly disposing of old used engine oil is important for both environmental and safety reasons. In most areas, it is illegal to dump used oil in the trash or down the drain. Instead, you should take the old oil to a recycling center or a service station that accepts used oil for recycling. Many automotive stores or repair shops will accept used oil for recycling. Be sure to store the used oil in a sealed container and transport it carefully to avoid any spills or leaks.

In conclusion, performing self-service on your car can be a great way to save money and keep your car running smoothly. However, it’s important to make sure you do it correctly to avoid any problems. By following the tips in this article, you can perform basic maintenance on your car with confidence and avoid any potential issues that may arise after self-service.

👉 Share this post 👍

Leave a Reply

Your email address will not be published. Required fields are marked *