How to change oil Toyota C-HR

The Toyota C-HR is a subcompact crossover SUV that was first introduced in 2016 as a 2017 model year vehicle. It was designed to offer a unique and sporty option in the subcompact SUV market, with its striking exterior design and modern features.

The creation of the Toyota C-HR was the result of several years of development by Toyota’s design and engineering teams. The first concept version of the C-HR was unveiled at the 2014 Paris Motor Show, and it received a positive reception from the public and the automotive industry.

The production version of the C-HR was introduced in Japan in December 2016, and it was subsequently released in other global markets. The first generation of the C-HR was produced from 2016 to 2021 and was available in both gasoline and hybrid versions.

The C-HR was designed to appeal to younger drivers, and it features a bold and edgy exterior design with angular lines, a sloping roofline, and a muscular stance. The interior of the C-HR is also modern and stylish, with a high-quality finish and advanced technology features such as a touchscreen infotainment system and a suite of advanced safety features.

Overall, the Toyota C-HR has been a good model for Toyota, with strong sales and positive reviews from critics and consumers alike. It has won several awards, including the 2017 Best Small SUV in the UK Car of the Year Awards, and the 2020 IIHS Top Safety Pick award. The C-HR has also helped Toyota expand its presence in the highly competitive subcompact SUV market.

In 2022, Toyota introduced the second-generation C-HR, which features a redesigned exterior and interior, as well as new technology and safety features. The new model is expected to continue the C-HR’s success and appeal to drivers who want a stylish and modern subcompact SUV.

Do I need to urgently change the oil right now?

What is the frequency (interval) of changing engine oil?

The recommended interval for changing the engine oil in a Toyota C-HR depends on several factors, including the type of engine, the driving conditions, and the oil type used. In general, Toyota recommends changing the oil in the C-HR every 10,000 miles or 12 months, whichever comes first. However, this interval may vary depending on certain situations.

For example, if the C-HR is used in severe driving conditions such as towing, frequent stop-and-go traffic, or driving in dusty or sandy areas, the recommended oil change interval may be reduced to every 5,000 miles or 6 months, whichever comes first. Additionally, if the C-HR is used for short trips or in extreme temperatures, the recommended interval may also be reduced.

52
Poll: how often do you change your engine oil?

Vote how often you try to change your oil

The spacing between oil changes can also be affected by the type of oil used. Toyota recommends using synthetic oil for the C-HR, which can offer better performance and longer life than conventional oil. Synthetic oil may also allow for longer oil change intervals, depending on the driving conditions and oil type.

How to check the engine oil level?

To check the engine oil level in a Toyota C-HR, follow these steps:

  1. Make sure the engine is cool and parked on a level surface.
  2. Open the hood and locate the engine oil dipstick. It is usually located near the front of the engine and has a yellow or orange handle.
  3. Pull the dipstick out and wipe it clean with a rag or paper towel.
  4. Reinsert the dipstick all the way back into the engine, wait a moment, and then pull it out again.
  5. Check the oil level on the dipstick. The oil level should be between the “low” and “full” marks on the dipstick.

If the oil level is low, you should add oil to the engine to bring it up to the recommended level. To do this, follow these steps:

  1. Determine the type of oil recommended for your Toyota C-HR by checking the owner’s manual.
  2. Purchase the correct type of oil and a funnel to add the oil to the engine.
  3. Remove the oil filler cap on the engine and insert the funnel into the hole.
  4. Slowly pour in the oil, checking the oil level on the dipstick frequently to make sure you do not overfill the engine.
  5. Replace the oil filler cap and dipstick, and start the engine to make sure the oil pressure light turns off.

Visual (express) assessment of the condition of engine oil

To visually inspect the current state of engine oil, you can follow these steps:

  1. Park the vehicle on a level surface and turn off the engine.
  2. Wait at least five minutes to allow the oil to settle and drain into the oil pan.
  3. Open the hood and locate the dipstick for the engine oil.
  4. Pull the dipstick out and examine the color and consistency of the oil.

The engine oil should be a clear, amber color when it is new or recently changed. Over time, the oil will darken as it accumulates dirt and contaminants. However, if the oil is very dark or appears thick and sludgy, it may be time for an oil change or there could be other issues with the engine.

In addition to a visual inspection, you can also use a rapid test with a piece of paper, known as an oil analysis test strip, to check the condition of the engine oil. To perform the test, follow these steps:

  1. Purchase an oil analysis test strip from an auto parts store or online retailer.
  2. Remove the dipstick from the engine and wipe it clean with a rag or paper towel.
  3. Insert the test strip into the dipstick tube and leave it in place for a few seconds.
  4. Remove the test strip and compare the colors on the strip to the reference chart provided with the kit.

The colors on the test strip can indicate the level of contaminants in the oil, such as fuel, coolant, or metal particles. This can help you identify potential engine problems early and take corrective action before they become more serious. However, it is important to note that oil analysis test strips are not a replacement for regular oil changes and other routine maintenance.

Preparing to change engine oil

What type of oil should be used for a car?

The type of oil recommended for a car can depend on the make and model, as well as the engine type and driving conditions. However, as for the Toyota C-HR series, the following is the recommended oil type for each generation:

  1. First generation (2016-2020): Toyota recommends using synthetic 0W-20 engine oil for the first generation Toyota C-HR. This type of oil can provide better performance and fuel economy than conventional oil, and is recommended for all driving conditions.
  2. Second generation (2020-present): The second generation Toyota C-HR also recommends using synthetic 0W-20 engine oil. However, Toyota has updated the engine for this generation to include a hybrid option, which uses a different type of oil. For the hybrid engine, Toyota recommends using synthetic 0W-16 engine oil.

It is important to follow the manufacturer’s recommendations for oil type and change intervals to ensure proper engine performance and longevity. Check the owner’s manual for specific guidelines and recommendations for your Toyota C-HR.

How to choose oil depending on the season and operating conditions?

Choosing the right oil for your car depends on several factors, including the season and operating conditions. Here are some tips to help you select the right oil for your car:

  1. Consider the viscosity rating: The viscosity rating is a measure of how thick the oil is at different temperatures. In general, a lower viscosity oil, such as 0W-20 or 5W-30, is better for colder temperatures, while a higher viscosity oil, such as 10W-40 or 20W-50, is better for hotter temperatures. Check the owner’s manual for the recommended viscosity rating for your car.
  2. Check for API certification: The American Petroleum Institute (API) provides a certification program for motor oils to ensure that they meet certain standards. Look for oils with the API “Starburst” symbol, which indicates that they meet the latest performance standards.
  3. Consider synthetic vs. conventional: Synthetic oils offer better performance and protection than conventional oils, and are better suited for extreme temperatures and heavy loads. However, they are more expensive. Consider your driving conditions and budget when choosing between synthetic and conventional oils.
  4. Check for special requirements: Some cars require specific types of oil due to their engine design or other factors. Check the owner’s manual or consult with a mechanic to ensure you are using the correct type of oil for your car.
  5. Consider additive packages: Some oils may contain additional additives, such as detergents or friction modifiers, that can provide extra protection or improve performance in certain conditions. Consider your driving habits and conditions when selecting an oil with additional additives.

By considering these factors, you can choose the right oil for your car depending on the season and operating conditions. Remember to follow the recommended oil change intervals and always use the recommended type of oil for your car.

What are the advantages and disadvantages of different types of oils for Toyota C-HR?

There are several types of oils that can be used in a Toyota C-HR, each with its own advantages and disadvantages. Here are some of the most common types of oils and their pros and cons:

  1. Conventional Oil: Advantages:
  • Generally the most affordable option.
  • Good for older engines or engines with low mileage.
  • Can work well in moderate temperatures.

Disadvantages:

  • Requires more frequent oil changes than synthetic oils.
  • May not perform as well in extreme temperatures or heavy loads.
  • Can leave more deposits and sludge in the engine over time.
  1. Synthetic Oil: Advantages:
  • Provides better performance and protection than conventional oil.
  • Lasts longer between oil changes.
  • Resists breakdown and sludge formation in high temperatures or heavy loads.

Disadvantages:

  • Generally more expensive than conventional oil.
  • May not be necessary for engines with low mileage or moderate driving conditions.
  • Not all engines are designed to use synthetic oil.
  1. High Mileage Oil: Advantages:
  • Contains special additives to help condition older engine seals and reduce oil consumption.
  • Provides better protection for engines with high mileage.

Disadvantages:

  • May not be necessary for engines with low mileage.
  • More expensive than conventional oil.
  • Not all engines require high mileage oil.
  1. Synthetic Blend Oil: Advantages:
  • Provides some of the benefits of synthetic oil at a lower cost.
  • Can work well in moderate to high temperatures and loads.
  • Can be used in a wide range of engines.

Disadvantages:

  • May not provide as much protection as full synthetic oil.
  • May not be necessary for engines with low mileage or moderate driving conditions.
  • More expensive than conventional oil.

It’s important to consult the owner’s manual and follow the manufacturer’s recommendations for oil type and change intervals for your Toyota C-HR. By considering the advantages and disadvantages of different types of oils, you can choose the best option for your driving habits and conditions.

Which engine oil to choose?

Here is a table with the selection of engine oil for a Toyota C-HR car of all generations:

GenerationEngineSuitable Oil ViscosityPopular American BrandsRequired Amount of OilArticle Number
1st (2016-2021)2.0L I40W-20, 5W-20Mobil 1, Pennzoil, Valvoline4.4 Quarts00279-0W-20
2nd (2022-Present)2.0L I40W-16Castrol, Mobil 1, Royal Purple4.4 Quarts00279-0W-16
Selection table of recommended motor oils for a Toyota C-HR

Which oil filter is right for you?

GenerationEnginePopular Brands of Oil FiltersCatalog NumberApproximate Cost
1st (2016-2021)2.0L I4Toyota Genuine Parts, K&N, Fram04152-YZZA1, HP-1010, PH6607$5-10
2nd (2022-Present)2.0L I4Toyota Genuine Parts, WIX, Purolator04152-YZZA7, 57047, PL10241$5-15
table with the selection of oil filters for Toyota C-HR of all generations

Do I need to warm up the engine before changing engine oil and how to do it correctly?

It is generally recommended to warm up the engine before changing the engine oil as warm oil flows more easily and can be drained more effectively. However, it is important not to overheat the engine, as hot engine components can cause burns or other injuries.

Here are the recommended steps for warming up your engine before changing the oil:

  1. Park your car on a flat and level surface, and engage the parking brake.
  2. Turn on the engine and let it run for 5-10 minutes, or until the engine reaches its normal operating temperature.
  3. Turn off the engine and wait a few minutes for the oil to settle back down into the oil pan.
  4. Locate the oil drain plug and oil filter, and prepare the tools you will need to remove them.
  5. Place an oil pan beneath the oil drain plug, and remove the drain plug to allow the old oil to drain out.
  6. Remove the old oil filter and install the new one.
  7. Replace the drain plug and add the appropriate amount of new oil to the engine.
  8. Start the engine and check for any leaks or other issues.

Step-by-step instruction

Step-by-step instructions for changing the engine oil on a Toyota C-HR:

Tools and Materials:

  • New engine oil
  • New oil filter
  • Oil filter wrench
  • Oil drain pan
  • Oil funnel
  • Ratchet wrench
  • Socket set
  • Oil filter wrench
  • Jack and jack stands (optional)

Step 1: Warm up the engine Run the engine for a few minutes to warm up the oil. This helps the oil to flow out more easily.

Step 2: Raise the car (optional) If you have a jack and jack stands, raise the car to give you better access to the oil drain plug and oil filter.

Step 3: Drain the oil Position the oil drain pan under the oil drain plug, and use a socket wrench to remove the plug. Allow the old oil to drain completely into the pan. Once the oil has drained, replace the drain plug and tighten it securely.

Step 4: Remove the old oil filter Using an oil filter wrench, loosen and remove the old oil filter. Be careful not to spill any oil that may still be in the filter.

Step 5: Install the new oil filter Dip your finger in new oil and rub it on the rubber gasket of the new oil filter. This will help create a better seal. Screw the new oil filter onto the engine by hand until it is snug, and then tighten it an additional 3/4 turn using an oil filter wrench.

Step 6: Add new oil Remove the oil cap on the top of the engine and place an oil funnel in the opening. Add the recommended amount of new oil, which can be found in your owner’s manual or online.

Step 7: Check the oil level and start the engine After adding the new oil, replace the oil cap and start the engine. Let it run for a few minutes, and then turn it off. Check the oil level using the dipstick, and add more oil if necessary.

Step 8: Dispose of the old oil and oil filter Dispose of the old oil and oil filter properly by taking them to a recycling center or auto parts store that accepts used oil and filters.

The time it takes to change the engine oil on a Toyota C-HR can vary depending on experience level, tools, and working conditions, but it typically takes around 30-60 minutes to complete. It is important to take your time and follow the recommended procedures to ensure a job well done.

Replacing transmission fluid in automatic transmission

What is the frequency (interval) of changing the transmission fluid in an automatic transmission?

The recommended interval for replacing the transmission fluid in automatic transmissions of Toyota C-HR is every 60,000 miles or 6 years, whichever comes first. However, the frequency can vary depending on several factors, such as driving conditions, driving habits, and the type of transmission fluid used.

If the car is frequently driven in heavy traffic, or used for towing, hauling heavy loads, or driving in hot or dusty conditions, the transmission fluid may need to be replaced more frequently. Similarly, if the car is used for racing or high-performance driving, the transmission fluid may need to be changed more often.

The type of transmission fluid used can also affect the frequency of replacement. Some synthetic transmission fluids are designed to last longer than conventional fluids, and may not need to be changed as frequently.

What transmission fluid to choose?

Find the right transmission fluid for your engine Toyota C-HR

Generation (Years of Production)Engine NameAmount of Fluid RequiredPopular Brands in the USCatalog Number
1st Generation (2017-2021)2.0L 4-cyl3.9 quartsMobil 1 Synthetic ATF122085-C
Valvoline MaxLife ATF822405
Castrol Transmax ATF06812
2nd Generation (2022-Present)2.0L 4-cyl3.9 quartsAisin ATF-0T4ATFS0T401
Toyota ATF Type T-IV08886-02305
Idemitsu ATF Type TLS-LV10106042-97204

Step-by-step instruction

Guide for beginners on how to change the transmission fluid in the automatic transmission of a Toyota C-HR:

Tools and materials needed:

  • Jack stands or a ramp
  • Drain pan
  • Funnel
  • Socket wrench and sockets
  • Replacement transmission fluid
  • Replacement transmission fluid filter (if applicable)
  • Replacement gasket or sealant (if applicable)

Instructions:

  1. Make sure the car is parked on a level surface and the engine is turned off.
  2. Jack up the car using jack stands or a ramp and secure it in place.
  3. Locate the transmission fluid pan under the car. It is usually a rectangular-shaped metal pan located at the bottom of the transmission.
  4. Place the drain pan underneath the transmission fluid pan.
  5. Remove the bolts that hold the transmission fluid pan in place using a socket wrench. Be careful as the fluid may start to drain out once the pan is removed.
  6. Remove the transmission fluid pan and the old gasket or sealant. If your car has a replaceable filter, remove the filter as well.
  7. Clean the transmission fluid pan and magnet with a clean rag or paper towel. The magnet is usually located at the bottom of the pan and is used to collect metal particles from the transmission.
  8. Install the new filter (if applicable) and gasket or apply a thin layer of sealant to the pan before reinstalling it. Tighten the bolts to the manufacturer’s recommended torque specification.
  9. Locate the transmission fluid dipstick and remove it. This is usually located near the engine on the transmission.
  10. Insert a funnel into the dipstick tube.
  11. Add the recommended amount of replacement transmission fluid using the funnel. Check the owner’s manual for the specific type and amount of transmission fluid required.
  12. Replace the transmission fluid dipstick and start the engine.
  13. Shift the transmission through all gears and let the engine idle for a few minutes.
  14. Check the transmission fluid level using the dipstick and add more fluid if necessary.
  15. Lower the car back to the ground and check for any leaks.

Possible questions after self-service

How can I check for engine oil leaks after changing it myself?

After changing the engine oil in your car, it is important to check for any oil leaks to ensure that everything was done correctly. Here are some steps to follow to check for engine oil leaks:

  1. Park your car on a level surface and turn off the engine.
  2. Open the hood and inspect the engine compartment for any visible signs of oil leaks, such as oil spots or stains.
  3. Check the oil filter and drain plug for any signs of oil leaks. Make sure they are tightened properly.
  4. Start the engine and let it run for a few minutes.
  5. Turn off the engine and wait a few minutes for the oil to settle.
  6. Check the dipstick to ensure that the oil level is within the acceptable range.
  7. Use a clean rag to wipe around the oil filter, drain plug, and other areas where oil may leak from.
  8. Wait for a few minutes and inspect the areas where you wiped for any signs of fresh oil leaks.
  9. Repeat this process over the course of a few days to ensure that there are no leaks.

If you notice any signs of oil leaks, you should address them immediately. It is also important to note that if you are unsure about changing the engine oil yourself, it is best to consult with a certified Toyota technician to ensure that the job is done correctly.

What problems can arise after an incorrect self-changing engine oil?

There are several problems that can arise after an incorrect self-changing engine oil in a Toyota C-HR. Some of the most common issues include:

  1. Engine damage: If the wrong type of oil or incorrect viscosity is used, it can cause damage to the engine over time. This can lead to decreased performance, reduced fuel efficiency, and eventually, engine failure.
  2. Oil leaks: If the oil filter or drain plug is not tightened properly, it can cause oil leaks. This can result in a loss of oil pressure, which can damage the engine.
  3. Reduced engine life: If the oil is not changed frequently enough or is not of high quality, it can lead to increased wear and tear on the engine. This can reduce the engine’s overall lifespan.
  4. Increased emissions: If the oil is not changed frequently enough, it can lead to increased emissions. This can result in a failed emissions test or a fine.
  5. Increased fuel consumption: If the oil is not of high quality or the wrong viscosity is used, it can increase fuel consumption. This can result in higher costs at the gas pump.

How to reset the oil change indicator?

To reset the oil change indicator on a Toyota C-HR after service, follow these steps:

  1. Turn the ignition to the “ON” position (but do not start the engine).
  2. Press the “MENU” button on the instrument cluster until “SETTINGS” is displayed on the screen.
  3. Use the “+” and “-” buttons to scroll to “MAINTENANCE” and press “ENTER”.
  4. Use the “+” and “-” buttons to scroll to “OIL MAINTENANCE” and press “ENTER”.
  5. Use the “+” and “-” buttons to select “RESET” and press “ENTER”.
  6. A confirmation message will appear on the screen. Use the “+” and “-” buttons to select “YES” and press “ENTER” to confirm.
  7. The message “COMPLETED” will appear on the screen to indicate that the oil change indicator has been reset.

Note: These steps may vary slightly depending on the model year of your Toyota C-HR. Consult your owner’s manual for specific instructions.

What to do with old oil after replacement?

Proper disposal of used engine oil is important to prevent contamination of the environment. Here’s what you should do with old used engine oil after self-replacement:

  1. Collect the used oil: Drain the old engine oil from your car into a clean, leak-proof container that has a tight-fitting lid. It’s important to avoid spilling or dripping the used oil during this process.
  2. Store the used oil: Store the container of used oil in a cool, dry place, away from children and pets. Make sure the lid is tightly sealed to prevent any spills or leaks.
  3. Find a collection center: Check with your local government or recycling center to see if they accept used motor oil for recycling. Many auto parts stores and service stations also accept used oil for recycling.
  4. Drop off the used oil: Once you have identified a collection center, transport the used oil in the sealed container to the center for proper disposal. Do not mix the used oil with other liquids, such as antifreeze or brake fluid.
  5. Repeat the process: Continue to collect used oil from future oil changes and dispose of it properly.

By following these steps, you can ensure that your used engine oil is disposed of safely and responsibly.

👉 Share this post 👍

2 thoughts on “How to change oil Toyota C-HR

Leave a Reply

Your email address will not be published. Required fields are marked *