How to change oil Suzuki Ignis

The Suzuki Grand Ignis is a subcompact crossover SUV that was introduced in 2000 by the Japanese automaker Suzuki. It was initially marketed as a compact MPV (multi-purpose vehicle) and was based on the Suzuki Ignis, which was introduced in 2000. The Grand Ignis is known for its spacious cabin and excellent fuel economy, making it a popular choice for families and commuters alike.

Generations and Features

There are two generations of the Suzuki Grand Ignis. The first generation was produced from 2000 to 2008 and was available as a 5-door hatchback or a 4-door sedan. It was offered with a range of petrol engines, including a 1.3L and a 1.5L engine, as well as a diesel engine.

The second generation was introduced in 2016 and is currently in production. It is available as a 5-door hatchback and features a 1.2L petrol engine, which delivers excellent fuel economy and low emissions. The Grand Ignis is known for its spacious interior, which can comfortably seat five passengers, as well as its advanced safety features, including airbags and electronic stability control.

Do I Need to Urgently Change the Oil Right Now?

If your Suzuki Grand Ignis is running smoothly and there are no warning lights on the dashboard, then you do not need to urgently change the oil. However, it is important to keep up with regular oil changes to ensure the longevity of your engine.

What is the Frequency (Interval) for Changing Engine Oil?

The recommended interval for changing the engine oil in a Suzuki Grand Ignis is every 10,000 kilometers or 6 months, whichever comes first. However, this interval may vary depending on your driving conditions. For example, if you frequently drive in stop-and-go traffic or in dusty conditions, you may need to change your oil more frequently.

49
Poll: how often do you change your engine oil?

Vote how often you try to change your oil

How to Check the Engine Oil Level?

To check the engine oil level in your Suzuki Grand Ignis, first, make sure that the engine is cold and parked on a level surface. Then, locate the dipstick, which is usually located near the front of the engine. Pull out the dipstick, wipe it clean with a rag, and reinsert it into the dipstick tube. Pull the dipstick out again and look at the oil level. The oil level should be between the two marks on the dipstick.

What Action Should be Taken if the Oil Level is Low?

If the oil level in your Suzuki Grand Ignis is low, you should add oil immediately. Refer to your owner’s manual for the correct type and viscosity of oil to use. To add oil, remove the oil filler cap and pour in the oil slowly. Be sure not to overfill the engine, as this can cause damage. After adding oil, check the oil level again to ensure that it is at the correct level.

Visual (Express) Assessment of the Condition of Engine Oil

Visual inspection of engine oil can help determine its condition and quality. To perform a visual inspection, start by opening the hood and locating the engine oil dipstick. Pull the dipstick out and observe the color and texture of the oil on the dipstick.

If the oil appears dark and dirty, it may be time for an oil change. Additionally, if there are any metal shavings or debris visible in the oil, this may indicate engine damage or wear. Milky or frothy oil may indicate a coolant leak or water contamination, which can be a serious issue.

A quick test to check the condition of the oil is to place a drop of oil on a piece of white paper. If the oil spreads out and leaves a dark ring around the edges, it may be time for an oil change.

Preparing to Change Engine Oil

Before changing the engine oil, gather all the necessary tools and materials, including a new oil filter, drain plug gasket, and the recommended type and quantity of oil. It is also important to ensure that the engine is cool and the vehicle is parked on a level surface.

What Type of Oil Should be Used for a Car?

The type of oil recommended for a car depends on the make and model of the vehicle. Consult the owner’s manual or a trusted mechanic to determine the correct type and viscosity of oil to use. It is also important to choose high-quality oil that meets or exceeds industry standards.

How to Choose Oil Depending on the Season and Operating Conditions?

Choosing the right oil for the season and operating conditions can help maximize engine performance and longevity. In general, a thinner oil is recommended for colder temperatures to ensure easy engine startup and optimal performance. Thicker oils are recommended for hotter temperatures to ensure proper lubrication and protection.

Additionally, consider the driving conditions and engine type when selecting oil. High-performance engines may require specific types of oil, and driving in extreme conditions, such as towing or off-roading, may require a different oil than normal everyday driving. Consult the owner’s manual or a trusted mechanic for recommendations on oil selection based on your driving habits and conditions.

What are the Advantages and Disadvantages of Different Types of Oils for Suzuki Ignis?

There are different types of engine oils available on the market, each with its advantages and disadvantages. The three main types of engine oils are mineral, semi-synthetic, and synthetic.

Mineral oils are the most basic type of engine oil and are derived from crude oil. They are affordable and readily available, but they offer limited performance benefits compared to synthetic or semi-synthetic oils.

Semi-synthetic oils are a blend of mineral and synthetic oils. They offer better performance and protection than mineral oils and are also more affordable than fully synthetic oils.

Fully synthetic oils are made entirely from synthetic base oils and offer the best performance and protection. They also provide better fuel economy and longer oil change intervals. However, fully synthetic oils can be more expensive than mineral or semi-synthetic oils.

Engine Oil Selection

Here is a table with the recommended engine oil for a Suzuki Ignis of all generations:

Generation Number (Year of Manufacture)EngineSuitable Oil ViscosityPopular American Brand (3 pcs.)Required Amount of OilArticle NumberApproximate Cost in the USA
First (2001-2008)1.3L5W-30Mobil 1, Valvoline, Pennzoil3.7 quarts98HC68J20$22.00-$35.00
Second (2008-2016)1.2L0W-20, 5W-20Royal Purple, Castrol, Quaker State3.7 quartsSAE 5W-20$22.00-$40.00
Third (2016-2021)1.2L0W-20Mobil 1, Pennzoil, Royal Purple3.7 quarts16510-61A21$25.00-$40.00

Note: It’s always recommended to consult the car’s owner manual for the exact type and viscosity of oil recommended by the manufacturer.

Which Oil Filter is Right for You?

Here is a table with the recommended oil filters for a Suzuki Ignis of all generations:

Generation (Year of Manufacture)EnginePopular Brand of Oil Filters in the USACatalog NumberApproximate Cost
First (2001-2008)1.3LFram, Purolator, BoschPH6607$5.00-$7.00
Second (2008-2016)1.2LK&N, WIX, Mobil 1HP-1008$8.00-$15.00
Third (2016-2021)1.2LAC Delco, Motorcraft, DensoXG6607$6.00-$12.00

Necessary tools and conditions

Before starting an independent engine oil change for the Suzuki Ignis, it’s important to gather the necessary tools and prepare the right conditions. Here are the tools you’ll need:

  • A socket wrench set with appropriate socket sizes for the oil pan bolt and the oil filter.
  • An oil filter wrench to remove the old filter.
  • An oil drain pan to catch the old oil.
  • A funnel to pour in the new oil.
  • A clean rag or paper towels to clean up any spills or drips.

Here are the conditions you should prepare:

  • Make sure the car is parked on level ground.
  • Allow the engine to cool down to avoid getting burned by hot oil.
  • Wear protective gloves to avoid getting oil on your skin.
  • Make sure you have the correct type and amount of oil, as well as a new oil filter, before starting the oil change process.

How to warm up the engine before changing the oil?

Before starting the process of changing the engine oil of your Suzuki Ignis, it is important to properly warm up the engine. This helps to ensure that the oil is heated and able to flow more easily, making it easier to drain from the engine. To warm up the engine, start the car and let it run for 5-10 minutes or until it reaches normal operating temperature.

Step-by-step instruction

Changing the engine oil of your Suzuki Ignis is an important maintenance task that should be done regularly. Here is a step-by-step guide for beginners to change the oil on their own:

  1. Prepare the necessary tools and materials: You will need a wrench to remove the drain plug, an oil filter wrench to remove the old oil filter, a container to catch the old oil, a new oil filter, and new engine oil.
  2. Warm up the engine: Before starting the process of changing the oil, make sure to warm up the engine as described above.
  3. Locate the drain plug: The drain plug is located on the bottom of the engine oil pan. Use the wrench to loosen the plug and place the container underneath to catch the old oil.
  4. Drain the old oil: Once the container is in place, remove the drain plug completely and let the old oil drain out completely. Be careful, as the oil may be hot.
  5. Replace the oil filter: Use the oil filter wrench to remove the old oil filter. Make sure to lubricate the gasket on the new oil filter with a small amount of oil before installing the new filter. Tighten the new oil filter by hand until it is snug.
  6. Add new oil: Use a funnel to pour the new engine oil into the engine oil fill port. Check the owner’s manual for the recommended amount of oil and viscosity grade.
  7. Check the oil level: Once the new oil is added, start the engine and let it run for a minute or so. Turn off the engine and wait a few minutes for the oil to settle in the oil pan. Check the oil level using the dipstick and add more oil if necessary.
  8. Clean up: Dispose of the old oil and filter properly. Clean up any spills or drips and properly dispose of any materials used.

It may take around 30-45 minutes to complete the oil change process, depending on your experience and comfort level with the task. By following this step-by-step guide, you can save money by doing the oil change yourself and keep your Suzuki Ignis running smoothly for years to come.

Replacing transmission fluid in automatic transmission

What is the frequency (interval) of changing the transmission fluid in an automatic transmission?

The frequency of changing the transmission fluid in an automatic transmission varies depending on the make and model of the car. In general, most manufacturers recommend changing the transmission fluid every 30,000 to 60,000 miles or every 2 to 4 years. However, some newer cars may have longer intervals, up to 100,000 miles.

The frequency may also be affected by factors such as driving conditions (e.g., stop-and-go traffic, towing), the age and mileage of the vehicle, and the type of transmission fluid being used. It is important to refer to the owner’s manual or contact a professional mechanic to determine the recommended interval for your specific vehicle.

What transmission fluid to choose?

Here is a table with the selection of transmission fluid for Suzuki Ignis:

GenerationEngineAmount of fluidPopular brands (US)Catalog numberApproximate cost (US)
1 (2000-2007)M13A4.0 qtMobil 1 Synthetic ATF, Valvoline MaxLife Multi-Vehicle ATF, Castrol Transmax Import Multi-Vehicle ATF112980, 68001292AA, 06818$45, $35, $40
2 (2017-present)K12B3.7 qtACDelco Professional Dexron VI Full Synthetic ATF, Valvoline MaxLife Multi-Vehicle ATF, Mobil 1 Synthetic ATF10-9395, 68157995AB, 112980$60, $35, $45

It is important to note that using the wrong type of transmission fluid or using low-quality fluid can cause damage to the transmission and affect its performance. Always refer to the owner’s manual or consult a professional mechanic to determine the appropriate transmission fluid for your vehicle.

It is also recommended to have the transmission fluid changed by a professional mechanic to ensure that it is done correctly and to avoid any potential damage to the transmission.

Required tools

To replace the transmission fluid in a Suzuki Ignis automatic transmission, you will need the following tools:

  • Transmission fluid (make sure to purchase the recommended fluid for your vehicle)
  • A drain pan
  • A funnel
  • A socket wrench set
  • A new transmission filter (if applicable)
  • A new gasket or seal (if applicable)
  • A jack and jack stands (if necessary)

Step-by-step instruction

Follow these step-by-step instructions to replace the transmission fluid in the automatic transmission of your Suzuki Ignis:

  1. Make sure the vehicle is on a level surface and the engine is cool.
  2. Locate the transmission fluid dipstick and remove it.
  3. Place a drain pan underneath the transmission pan.
  4. Use a socket wrench to remove the bolts securing the transmission pan to the transmission. Slowly and carefully remove the pan, taking care not to spill any fluid.
  5. Clean the transmission pan and gasket thoroughly with a clean, lint-free cloth.
  6. Remove the old transmission filter (if applicable). Install a new filter and gasket or seal (if applicable).
  7. Use the funnel to add the recommended amount of new transmission fluid to the transmission through the dipstick tube. Start with a smaller amount and add more as necessary.
  8. Replace the transmission pan and tighten the bolts to the manufacturer’s specifications.
  9. Start the engine and allow it to idle for a few minutes. Check the transmission fluid level using the dipstick and add more fluid if necessary.
  10. Take the vehicle for a short drive and check for any leaks.
  11. Dispose of the old fluid and filter properly.

It should take around 30-60 minutes to complete this task depending on your experience level and the specific model of your Suzuki Ignis.

Possible questions after self-service

What problems can arise after an incorrect self-changing engine oil?

Changing the engine oil in your car is an important task that should not be taken lightly. While it may seem like a simple process, there are many things that can go wrong if the oil is changed incorrectly. Some common problems that can arise after an incorrect self-changing engine oil include:

  1. Overfilling or underfilling the engine oil, which can cause damage to the engine.
  2. Using the wrong type of oil, which can lead to decreased engine performance and increased wear and tear.
  3. Forgetting to replace the oil filter, which can result in contaminants circulating in the oil and causing damage to the engine.
  4. Tightening the oil filter or drain plug too much, which can cause damage to the oil pan or engine block.

How can I check for engine oil leaks after changing it myself?

After changing the engine oil yourself, it’s important to check for any leaks. Here’s how to do it:

  1. First, let the engine run for a few minutes to circulate the oil.
  2. Turn off the engine and wait for a few minutes to allow the oil to settle.
  3. Check the area around the oil filter and drain plug for any signs of leakage, such as oil stains or drips.
  4. If you notice any leaks, tighten the affected component or replace the gasket as needed.
  5. Once you’ve addressed any leaks, start the engine again and recheck for any signs of leakage.

How to reset the oil change counter?

If you’ve changed the oil yourself on your Suzuki Ignis, you’ll need to reset the oil change counter. Here’s how to do it:

  1. Turn the ignition to the “On” position without starting the engine.
  2. Press the “Mode” button on the instrument cluster until the odometer display shows the trip meter.
  3. Turn the ignition to the “Off” position.
  4. Press and hold the “Mode” button while turning the ignition to the “On” position.
  5. Continue holding the “Mode” button until the odometer display shows “000000”.
  6. Release the “Mode” button and turn the ignition to the “Off” position.
  7. Start the engine and verify that the oil change counter has been reset.

What to do with old oil after replacement?

It’s important to dispose of old used engine oil properly after changing it yourself. Here are some options:

  1. Check with your local recycling center or auto parts store to see if they accept used oil for recycling.
  2. Take the used oil to a hazardous waste disposal facility in your area.
  3. Pour the used oil into a sealed container and dispose of it with your household trash.

Remember, used engine oil is harmful to the environment and should never be poured down the drain or onto the ground. By disposing of it properly, you’re doing your part to protect the environment and keep our communities clean.

👉 Share this post 👍

Leave a Reply

Your email address will not be published. Required fields are marked *