How to change oil Renault (Dacia) Logan

Renault Logan (Dacia Logan) is a compact car model that was introduced in 2004 by the French automaker Renault. It was designed to be an affordable and practical vehicle, especially for emerging markets. The Logan was first manufactured in Romania and was later produced in several other countries, including Russia, Brazil, India, Iran, and Colombia. The model was a huge success for Renault, as it offered a spacious and reliable car at an affordable price.

The Logan has undergone several updates and improvements over the years, with three generations currently available on the market. The first-generation Logan was produced from 2004 to 2012 and was available in sedan, wagon, and hatchback versions. The second-generation Logan was introduced in 2012 and is still in production today. It features a more modern design and improved safety features. The third-generation Logan was launched in 2020 and offers even more advanced features and a more stylish look.

The Renault Logan is known for its spacious interior, practicality, and affordability. It is a simple and reliable car that is easy to maintain and offers good fuel economy. The Logan is also known for its safety features, such as anti-lock brakes, airbags, and electronic stability control. Other features include power windows, air conditioning, and a modern infotainment system.

Do I Need to Urgently Change the Oil Right Now?

If you notice that the oil warning light is on, or if you hear strange noises coming from the engine, it may be a sign that you need to change the oil immediately. It’s important to check the oil level regularly and keep track of when it was last changed.

What is the Frequency for Changing Engine Oil?

The frequency for changing the engine oil in a Renault Logan is generally every 10,000 kilometers or every 6 months, whichever comes first. However, the frequency can vary depending on several factors, such as driving conditions, temperature, and the type of oil used.

50
Poll: how often do you change your engine oil?

Vote how often you try to change your oil

How to Check the Engine Oil Level?

To check the engine oil level in a Renault Logan, follow these steps:

  1. Park the car on a level surface and wait for the engine to cool down.
  2. Open the hood and locate the dipstick, which is usually labeled “Engine Oil.”
  3. Pull the dipstick out and wipe it clean with a cloth or paper towel.
  4. Reinsert the dipstick all the way in, then pull it out again and check the oil level. The oil level should be between the minimum and maximum marks on the dipstick.
  5. If the oil level is low, add the recommended type of oil until it reaches the correct level. Do not overfill the engine, as this can cause damage.

In conclusion, the Renault Logan is a reliable and practical car that offers good value for money. Regular maintenance, including oil changes, is important to keep the car running smoothly and avoid costly repairs. By following the recommended oil change intervals and checking the oil level regularly, you can ensure that your Renault Logan stays in good condition for years to come.

Visual (Express) Assessment of the Condition of Engine Oil

Visual inspection of the engine oil can give an indication of its current condition. To visually assess the oil, follow these steps:

  1. Park the car on a level surface and wait for the engine to cool down.
  2. Open the hood and locate the dipstick.
  3. Pull the dipstick out and examine the color and consistency of the oil. The oil should be transparent or translucent, and have a yellowish or brownish color. If the oil is dark, opaque, or has a milky texture, it may indicate a problem with the engine.
  4. Check for any metal shavings or debris in the oil, which may indicate engine damage or wear.

Rapid Test with a Piece of Paper

A quick and simple way to test the condition of the engine oil is to use a piece of paper. To do this test, follow these steps:

  1. Take a white piece of paper and put a few drops of oil on it.
  2. Wait for the oil to spread out on the paper.
  3. Examine the shape and color of the oil stain. If the oil is transparent and has a circular shape, it is in good condition. If the oil has an irregular shape, is dark in color, or has particles in it, it may indicate a problem with the engine.

Preparing to Change Engine Oil

Before changing the engine oil, make sure you have the following:

  1. The recommended type and amount of oil for your car.
  2. A new oil filter.
  3. A drain pan to collect the old oil.
  4. A wrench or socket set to remove the drain plug and oil filter.

What Type of Oil Should Be Used for a Car?

The type of oil that should be used for a car depends on several factors, including the make and model of the car, the age and mileage of the engine, and the driving conditions. Consult the owner’s manual or a professional mechanic to determine the recommended type of oil for your car.

In general, there are two main types of engine oil: synthetic and mineral. Synthetic oil is more expensive but offers better performance and protection for the engine. Mineral oil is cheaper but may not offer the same level of protection in extreme conditions.

How to Choose Oil Depending on the Season and Operating Conditions?

The type of oil used in a car should be chosen based on the season and operating conditions. In colder temperatures, a thinner oil is recommended to ensure proper lubrication of the engine. In warmer temperatures, a thicker oil may be used to provide better protection against heat.

If the car is used for towing or heavy loads, a higher viscosity oil may be needed to protect the engine under stress. Similarly, if the car is used for frequent short trips, a synthetic oil may be preferred to prevent buildup of sludge in the engine.

Consult the owner’s manual or a professional mechanic for recommendations on the best type of oil for your car based on the specific operating conditions.

Advantages and Disadvantages of Different Types of Oils for Renault Logan

There are different types of engine oils available for Renault Logan, each with its advantages and disadvantages. Here are some of the most commonly used oils for Renault Logan and their characteristics:

  1. Mineral Oil – This oil is made from crude oil and is the most basic type of oil. It is affordable and widely available, but it may not offer the same level of performance and protection as synthetic oils.
  2. Synthetic Oil – This oil is made from chemical compounds and offers better performance and protection than mineral oil. It is more expensive but can last longer and perform better in extreme temperatures and conditions.
  3. Semi-Synthetic Oil – This oil is a blend of mineral and synthetic oils and offers a balance of affordability and performance.

Engine Oil Selection

Here is a table with the selection of engine oil for a Renault Logan car of all generations:

Generation (Year)EngineSuitable Oil ViscosityPopular American BrandRequired Amount of OilArticle NumberApproximate Cost in the USA
1 (2004-2013)1.4L5W-30Mobil 1, Valvoline, Pennzoil3.7 L15400RNAA02$25-$30
1.6L5W-30Mobil 1, Valvoline, Pennzoil4.2 L15400PLMA02$25-$30
2 (2013-2021)1.6L5W-30Mobil 1, Valvoline, Pennzoil4.2 L15400PLMA02$25-$30
1.0L5W-40Mobil 1, Valvoline, Pennzoil3.5 L15400RNAA01$25-$30
3 (2021-present)1.0L0W-20Mobil 1, Valvoline, Pennzoil3.3 L15400RNAA02$25-$30
1.6L5W-30Mobil 1, Valvoline, Pennzoil4.2 L15400PLMA02$25-$30

Which oil filter is right for you?

Here is a table with the selection of oil filters for Renault Logan of all generations:

Generation (Year of Manufacture)EnginePopular Oil Filter Brands (USA)Catalog NumberApproximate Cost
1st (2004-2013)1.4LFram, Purolator, BoschPH6811, L14612, 3323$4-$6
1st (2004-2013)1.6LFram, Purolator, BoschPH6811, L14612, 3323$4-$6
2nd (2013-2022)1.6LMann, Wix, K&NHU820x, 57047, PS-7027$8-$12
3rd (2022-Present)1.0LFram, K&N, Mobil 1XG7317, HP-1002, M1-110$8-$14
3rd (2022-Present)1.3LFram, K&N, Mobil 1XG7317, HP-1002, M1-110$8-$14

Necessary tools and conditions

To prepare for an independent engine oil change for the Renault Logan, you will need the following tools:

  • Oil filter wrench
  • Socket wrench and socket set
  • Oil drain pan
  • Funnel
  • Rag or shop towels
  • New oil filter
  • New engine oil
  • Safety glasses and gloves

Make sure that the engine is warm before you begin, but not hot. The recommended temperature for changing oil is between 50-70 degrees Celsius. Also, ensure that the car is parked on a flat surface and the parking brake is engaged. Before starting the oil change process, read the owner’s manual for the specific steps and recommendations for your Renault Logan model.

How to warm up the engine before changing the oil?

Warming up the engine before changing the oil is an important step to ensure that the oil flows more easily and can be drained completely. To properly warm up the engine, start the car and let it idle for 5-10 minutes until the temperature gauge reads at least 50 degrees Celsius. However, it is important not to let the engine get too hot, as this can be dangerous when working with hot oil.

Step-by-step instruction

Here are the step-by-step instructions for beginners to change Renault Logan engine oil on their own:

  1. Warm up the engine: Start the car and let it idle for 5-10 minutes until the temperature gauge reads at least 50 degrees Celsius. Do not let the engine get too hot.
  2. Drain the old oil: Locate the oil drain plug under the car and place the oil drain pan underneath it. Use the socket wrench and socket to loosen and remove the drain plug, allowing the old oil to drain out completely.
  3. Replace the oil filter: Use the oil filter wrench to remove the old oil filter. Apply a small amount of new oil to the gasket of the new oil filter before installing it. Tighten the new oil filter by hand until it is snug.
  4. Add new oil: Use the funnel to pour the recommended amount of new engine oil into the engine. Refer to the owner’s manual for the specific amount and viscosity of oil recommended for your Renault Logan model.
  5. Check the oil level: Use the dipstick to check the oil level. Start the engine and let it run for a few minutes before checking the oil level again. Add more oil if necessary.
  6. Clean up: Wipe off any spilled oil and replace the oil drain plug. Dispose of the old oil and oil filter properly according to local regulations.

The entire process can take around 30-45 minutes for beginners, depending on their level of experience and the tools available. However, it is important to take the necessary time and care to ensure a successful oil change and avoid any potential issues in the future.

Replacing transmission fluid in automatic transmission

What is the frequency (interval) of changing the transmission fluid in an automatic transmission?

The frequency of changing the transmission fluid in an automatic transmission can vary depending on the manufacturer’s recommendations and the vehicle’s usage. Generally, it is recommended to replace the transmission fluid every 30,000 to 60,000 miles (48,000 to 96,000 km) or every 3 to 5 years. However, some manufacturers may recommend a longer interval, such as 100,000 miles (160,000 km), for certain vehicles or driving conditions. It is important to consult the owner’s manual or a certified mechanic for the recommended interval for your specific vehicle.

What transmission fluid to choose?

Make a beautiful table with the selection of transmission fluid for Renault Logan. In the table, indicate the generation (years of production of the model), engine name, the amount of fluid required, three popular brands in the US, the catalog number of each product, and the approximate cost in the US.

GenerationEngineFluid AmountPopular Brands in USCatalog NumberApproximate Cost (US)
1 (2004-2013)1.4L, 1.6L, 1.5dCi3.3 qt (3.1 L)Mobil 1 Synthetic ATF, Valvoline MaxLife Multi-Vehicle ATF, Castrol Transmax Import Multi-Vehicle ATF112980, 68171487PA, 06818$10-$15 per quart
2 (2013-2020)1.6L, 1.5dCi3.7 qt (3.5 L)Amsoil Signature Series Fuel-Efficient Synthetic Automatic Transmission Fluid, Royal Purple Max ATF High Performance Synthetic Automatic Transmission Fluid, Mobil 1 Synthetic ATFATLTF, 12220, 12221$12-$20 per quart
3 (2020-present)1.6L, 0.9TCe, 1.0SCe3.7 qt (3.5 L)ACDelco Dexron VI Full Synthetic Automatic Transmission Fluid, Pentosin ATF1 Synthetic Automatic Transmission Fluid, Castrol Transmax DEX/MERC ATF10-9395, 1058107, 68043742AA$10-$20 per quart

Note: The table includes popular brands and approximate costs in the US, but it is important to choose a transmission fluid that meets the specifications recommended by the vehicle manufacturer. Consult the owner’s manual or a certified mechanic for specific recommendations.

Required tool

To replace the transmission fluid in a Renault Logan automatic transmission, you will need the following tools and materials:

  • Jack and jack stands or a car lift
  • Drain pan
  • Funnel
  • Socket wrench set
  • Torque wrench
  • New transmission fluid
  • Transmission filter and gasket (if necessary)
  • Disposable gloves
  • Safety goggles

Step-by-step instruction

Here is a step-by-step guide on how to change the transmission fluid in the automatic transmission of a Renault Logan:

  1. Make sure the car is parked on a level surface and the engine is turned off.
  2. Lift the car with a jack and jack stands or a car lift, and secure it in place.
  3. Locate the transmission pan, which is usually located under the car near the transmission.
  4. Place the drain pan under the transmission pan to catch the old fluid.
  5. Use the socket wrench set to remove the bolts that hold the transmission pan in place, and carefully lower the pan to drain the old fluid.
  6. Use a clean cloth to clean the transmission pan, gasket, and magnet.
  7. Remove the old transmission filter and gasket if necessary, and replace them with new ones.
  8. Use the torque wrench to tighten the bolts on the transmission pan to the manufacturer’s specifications.
  9. Use the funnel to pour the new transmission fluid into the transmission, following the manufacturer’s recommended amount and type.
  10. Start the engine and let it idle for a few minutes.
  11. Shift through all the gears on the transmission, and then check the fluid level again using the dipstick.
  12. Lower the car and take it for a test drive to make sure everything is working properly.

It may take around 1-2 hours to complete the transmission fluid replacement process, depending on your experience and the tools you have available.

Possible questions after self-service

Maintaining your car’s engine is important to keep it running smoothly and reliably. One of the most common maintenance tasks is changing the engine oil. While it’s important to have it done regularly, many car owners choose to do it themselves to save time and money. However, improper engine oil changes can lead to various problems down the line. In this article, we will discuss some of the possible questions and concerns that may arise after an incorrect self-changing engine oil.

What problems can arise after an incorrect self-changing engine oil?

An incorrect self-changing engine oil can lead to several problems, including decreased engine performance and efficiency. Using the wrong type of oil can cause premature wear and tear on the engine components, leading to expensive repairs. Overfilling the engine with oil can cause the oil to foam, which can lead to air pockets in the oil system, causing damage to the engine bearings and other components. Additionally, an underfilled engine can cause insufficient lubrication, which can lead to engine overheating and premature wear of the engine components.

How can I check for engine oil leaks after changing it myself?

After an oil change, it’s important to check for any oil leaks that may have occurred during the process. The first thing to check is the oil filter, which must be tightly screwed in place. Check the oil pan for any leaks around the drain plug. Another area to check is the valve cover gasket, which can wear out over time and cause oil leaks. If you notice any leaks, it’s important to fix them as soon as possible to avoid any further damage to the engine.

How to reset the oil change counter?

Resetting the oil change counter on your Renault Logan is a simple process. Start by turning the ignition key to the “On” position, but don’t start the engine. Press the accelerator pedal three times within 10 seconds. Turn off the ignition, and then turn it back on again to make sure the counter has been reset.

What to do with old oil after replacement?

After changing the engine oil, it’s important to dispose of the old oil properly. Used engine oil can be harmful to the environment if not disposed of correctly. Many auto parts stores and service stations offer oil recycling services. Alternatively, you can contact your local waste disposal facility for information on how to dispose of used oil safely and responsibly. Do not pour used oil down the drain or in the trash, as it can contaminate water sources and harm wildlife.

In conclusion, while changing the engine oil yourself can be a great way to save money, it’s important to do it correctly to avoid any possible problems. Always use the correct type of oil, and be sure to dispose of the old oil properly. If you’re unsure about the process or encounter any problems, it’s always best to seek professional help from a trusted mechanic or auto service center.

👉 Share this post 👍

Leave a Reply

Your email address will not be published. Required fields are marked *