How to change oil Toyota Corolla Eleventh Generation (2013-2019)

The Toyota Corolla has been a popular car model since its launch in the 1960s, and has undergone many changes and updates over the years. The 11th generation of the Toyota Corolla was introduced in 2013 and was the result of a major overhaul of the previous model.

The interior was also redesigned, with a more spacious and comfortable cabin, and a range of advanced features including a touchscreen display, Bluetooth connectivity, and a backup camera. Under the hood, Toyota introduced a range of new engine options, including a more powerful 1.8-liter four-cylinder engine that delivered improved performance and fuel efficiency.

One of the most significant improvements in the 11th generation Corolla was in the area of safety. Toyota made a range of advanced safety features standard across all trim levels, including lane departure warning, automatic high beams, and forward collision warning with automatic emergency braking. These features helped the Corolla achieve top safety ratings from organizations like the National Highway Traffic Safety Administration (NHTSA) and the Insurance Institute for Highway Safety (IIHS).

Do I need to change my engine oil right now

For the Toyota Corolla 11th generation, the recommended oil change interval is every 10,000 miles or 12 months, whichever comes first. However, the exact oil change interval may vary depending on the specific model, usage conditions, and other factors.

Several factors can affect the replacement interval for engine oil, including:

  1. Driving conditions: Frequent short trips, stop-and-go traffic, and extreme temperatures can cause the engine oil to break down faster, leading to the need for more frequent oil changes.
  2. Driving habits: Aggressive driving, towing heavy loads, and driving in dusty or dirty environments can cause more wear and tear on the engine, which may require more frequent oil changes.
  3. Type of oil used: The type and quality of oil used can also affect the replacement interval. Synthetic oils typically last longer than conventional oils and can go up to 15,000 miles or more between changes.
  4. Age of the engine: As an engine gets older, it may require more frequent oil changes due to increased wear and tear and the potential for oil leaks.
  5. Maintenance history: Regular oil changes and other maintenance tasks can help prolong the life of an engine and reduce the need for more frequent oil changes.

It’s important to follow the manufacturer’s recommended oil change interval and to check the oil level and condition regularly between changes. If the oil level is low, or if the oil appears dirty or contaminated, it’s a good idea to have it changed sooner.

How to check the engine oil level yourself?

  1. Park the car on a level surface and turn off the engine. Wait a few minutes to allow the oil to settle in the oil pan.
  2. Open the hood of the car and locate the oil dipstick. The oil dipstick has a yellow handle and is usually near the front of the engine.
  3. Remove the oil dipstick and wipe it clean with a clean rag or paper towel. Re-insert the dipstick all the way back in its tube.
  4. Remove the dipstick again and check the oil level. The oil level should be between the two marks on the dipstick. If the oil level is below the lower mark, you need to add more oil.
  5. If you need to add more oil, first remove the oil filler cap located on the top of the engine. Add a small amount of oil at a time, checking the level frequently, until the oil level is between the two marks on the dipstick.
  6. Once the oil level is correct, re-insert the dipstick and tighten the oil filler cap.

Why did the car feel depressed?
Because it had a low “elf” esteem!

car joke

Analysis of the current state of engine oil (quick test on a piece of paper)

This method provides a quick and simple way to assess the condition of the engine oil and identify any potential issues or contaminants.

To perform an oil analysis, a small sample of the engine oil is taken and placed on a test strip or piece of filter paper. The test strip or paper is then compared to a color chart or other visual reference to determine the oil’s condition.

The test strip or paper may be designed to test for various factors such as:

  1. Viscosity: The thickness of the oil, which can affect its ability to lubricate engine parts.
  2. Acidity: The level of acidity or alkalinity in the oil, which can indicate the presence of contaminants or the need for an oil change.
  3. Metal content: The presence of metal particles in the oil, which can indicate wear and tear on engine parts.
  4. Fuel or coolant contamination: The presence of fuel or coolant in the oil, which can indicate a leak or other issue.
Poll: how often do you change your engine oil?

Vote how often you try to change your oil

Preparing for an independent engine oil change

To change the engine oil in your Corolla yourself, you must have the following tools and materials:

  1. A new oil filter
  2. Engine oil that meets the manufacturer’s specifications (check the owner’s manual for the recommended oil type and viscosity)
  3. An oil filter wrench to remove the old filter
  4. A socket wrench and socket set to remove the drain plug
  5. A drain pan to collect the old oil
  6. A funnel to pour the new oil into the engine
  7. Latex gloves to protect your hands

Before starting the oil change, it’s important to plan and prepare in the following ways:

  1. Choose a location: Select a flat, level surface to park the car. The surface should be clean and free of debris. You may also want to consider placing cardboard or a tarp underneath the car to catch any spills or drips.
  2. Gather tools and supplies: Make sure you have all the necessary tools and supplies before beginning the oil change. This will save you time and prevent any unnecessary trips to the store.
  3. Warm up the engine: Start the engine and let it run for a few minutes to warm up the oil. This will make it easier to drain the old oil.
  4. Turn off the engine: After warming up the engine, turn it off and let it cool down for a few minutes before beginning the oil change.
  5. Consult the owner’s manual: Refer to the owner’s manual for the specific steps and recommendations for changing the oil in your particular model of Toyota Corolla.

By planning and preparing in advance, you can ensure a smooth and successful oil change for your Toyota Corolla.

Which engine oil is suitable for my engine?

EngineSuitable ViscosityRequired VolumeBrandsCatalog NumberApproximate Cost (USD)
1.8L 4-cylinder0W-20, 5W-204.4 quartsMobil 1120764$32.99
2.4L 4-cylinder0W-20, 5W-204.6 quartsMobil 1120764$32.99

Which oil filter to choose?

EngineOil Filter (Brand)Catalog NumberCost (USD)
1.8L 4-cylinderToyota04152-YZZA1$5.30
2.0L 4-cylinderToyota04152-YZZA6$5.98

Note: The catalog numbers and costs listed in this table are for example purposes only and may vary depending on the retailer and location. It’s important to always verify the correct specifications and prices with a trusted retailer or the manufacturer’s website.

Step-by-step instruction

  1. Make sure your car is parked on a flat surface and the engine is cool to the touch.
  2. Locate the oil drain plug underneath the car. It’s usually a large bolt located on the bottom of the oil pan.
  3. Place the drain pan underneath the oil drain plug and unscrew the plug with a wrench or socket set. Let the oil drain out completely.
  4. While the oil is draining, locate the oil filter on the engine. It’s usually a cylindrical or cartridge-shaped component. Use an oil filter wrench to loosen and remove the old oil filter.
  5. Take the new oil filter and apply a thin layer of fresh engine oil to the rubber gasket on the top of the filter.
  6. Screw the new oil filter in place, tightening it with your hands. Do not overtighten.
  7. Once the oil has finished draining, replace the drain plug and tighten it to the manufacturer’s recommended torque specification.
  8. Locate the oil filler cap on the engine and remove it.
  9. Using a funnel, pour the new engine oil into the engine through the oil filler hole. Check the owner’s manual for the recommended amount and type of oil.
  10. Replace the oil filler cap and start the engine. Let it run for a few minutes to circulate the new oil throughout the engine.
  11. Turn off the engine and check the oil level with the dipstick. Add more oil if necessary to reach the full mark.
  12. Check for any leaks around the oil drain plug and oil filter.
  13. Clean up any spills with a rag or paper towel.

Congratulations, you’ve successfully changed the engine oil on your Toyota Corolla 11th generation!

Transmission Fluid Replacement

The frequency or interval for replacing the transmission fluid of an 11th generation Toyota Corolla can vary depending on factors such as driving conditions, usage, and the type of transmission in the vehicle.

Generally, Toyota recommends replacing the automatic transmission fluid every 60,000 miles or 72 months (6 years) for the 11th generation Toyota Corolla. However, the recommended interval for a manual transmission may be different.

Factors that can influence the interval for replacing the transmission fluid include:

  • Heavy towing or hauling loads
  • Frequent stop-and-go driving
  • Driving in extreme hot or cold temperatures
  • Driving on hilly or mountainous terrain
  • Racing or high-performance driving
  • Age of the vehicle
  • Condition of the transmission fluid (color, odor, and level)

Which gear oil should I choose for my engine?

EngineEngine Oil ViscosityPopular US Brand (Catalog Number)Amount to FillEstimated Cost
1.8L 4-cylinder (2ZR-FE)0W-20 or 5W-20Mobil 1 (120760), Castrol (03057), Pennzoil (550046126)4.4-4.6 quarts$20-$35
2.0L 4-cylinder (M20A-FKS)0W-16 or 0W-20Valvoline (VV946), Royal Purple (341777), Amsoil (ASM-QT)4.7 quarts$30-$50
Table with a selection of suitable transmission fluid for 11th generation Corolla engines

Step-by-step instruction

  1. Park your car on level ground and set the parking brake. Turn off the engine and allow it to cool for a few minutes.
  2. Locate the transmission fluid pan underneath your vehicle. It is located underneath the transmission and is typically held in place by bolts. You may need to raise the vehicle using a jack and jack stands to access the pan.
  3. Place the transmission fluid drain pan underneath the transmission fluid pan to catch the old fluid.
  4. Loosen the bolts on the transmission fluid pan in a criss-cross pattern to avoid warping the pan. Once all the bolts are loose, remove the bolts and gently lower the pan to let the old fluid drain into the drain pan.
  5. Once the fluid has drained out, clean the transmission pan thoroughly using a clean rag. Ensure that there are no metal shavings or debris in the pan.
  6. Remove the old transmission filter and gasket from the transmission using a screwdriver or pliers. Clean the area where the filter was located to remove any debris.
  7. Install the new transmission filter and gasket using the manufacturer’s instructions. Ensure that the filter is properly aligned and secure.
  8. Reinstall the transmission pan using the new gasket and bolts. Tighten the bolts in a criss-cross pattern to ensure a proper seal. Do not overtighten the bolts.
  9. Using a funnel, add the recommended amount of new transmission fluid to the transmission. Refer to your owner’s manual for the correct type and amount of fluid to use.
  10. Start the engine and let it idle for a few minutes. Check the transmission fluid level and add more fluid if necessary.
  11. Test drive your vehicle to ensure that it is shifting smoothly and that there are no leaks.

Congratulations! You have successfully changed the transmission fluid in your 11th generation Toyota Corolla.

👉 Share this post 👍

Leave a Reply

Your email address will not be published. Required fields are marked *